Everyday exposure to environmental elements and chemicals such as chloride will eventually lead to the corrosion of concrete structures. From spalling and cracks to larger structural repair projects in the construction industry cementitious repair mortars are commonly used to restore damaged concrete.
At CPRL we offer competitive prices on a range of industry-grade cementitious/ concrete repair mortars from Sika and Fosroc. This range of products is designed specifically for repair, restoration and rehabilitation of concrete structures and can be easily applied to buildings, walkways, bridges, walls and stairs.
-
Concrete RepairsFlexcrete Monolevel RM – 25kg
Uses
- Spray or trowel applied render to provide a fair-faced waterproof finish suitable for external and basement applications.
- Suitable for use as ac a Category CS IV One Coat Render for External and Internal use on Walls as described in EN 998-1.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete RepairsFlexcrete Monomix HD – 25kg
Uses
- Hand or spray applied for structural repair, rendering and profiling of vertical, horizontal and overhead surfaces, including trafficked areas. Suitable for repair methods 3.1,
3.3, 7.1, 7.2 as defined by BS EN 1504 -3.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) - Hand or spray applied for structural repair, rendering and profiling of vertical, horizontal and overhead surfaces, including trafficked areas. Suitable for repair methods 3.1,
-
Concrete RepairsFlexcrete Monomix – 25kg
Uses
- Structural repair, rendering and profiling of reinforced concrete in vertical, horizontal and overhead situations.
- Suitable for repair methods 3.1, 7.1, 7.2 as defined by BS EN 1504-3.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete RepairsFosroc – Renderoc HB30 (22kg)
Uses
- For the reinstatement of concrete where low permeability characteristics are required but where high compressive strength is not the most important consideration. If high compressive strength is required Renderoc HB45 should be used.
- Renderoc HB30 has been specifically developed for vertical and overhead repair work where its lightweight nature and high build characteristics make it ideal.
- Renderoc HB30 is suitable for repair methods 3.1, 3.3, 7.1, 7.2 as defined by BS EN 1504-3.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete Repairs
Fosroc – Renderoc HB45 (25kg)
Fosroc – Renderoc HB45 (25kg)
High performance, hand / wet-spray applied, fibre reinforced high build, high strength, concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R4.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete RepairsSika Ferrogard 903+ (25L)
Surface Applied Corrosion Inhibitor for Reinforced Concrete
Sika® FerroGard® -903+ penetrates concrete and forms an adsorbed protective film on the surface of the steel reinforcement. The protective adsorbed film of Ferrogard 903+ reduces the rate of corrosion in carbonated and chloride contaminated concrete.
Sika® FerroGard® -903+ is normally applied as part of a corrosion management strategy and is compatible and a component of all the Sika concrete repair and protection systems.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete RepairsSika MonoTop 412N (25kg)
R4 Concrete Repair Mortar
Sika MonoTop®-412 N is a 1-component, fibre reinforced, low shrinkage repair mortar meeting the requirement of class-R4 of EN 1504-3.
- Class R4 of EN 1504-3
- Sulphate resistant
- For hand or machine application
PLEASE CALL US FOR UP TO DATE PRICES
(0 reviews) -
Concrete RepairsSika MonoTop 630 (25kg)
R4 FAST SETTING CEMENTITIOUS REPAIR MORTARSika MonoTop®-630 Rapid (previously Sika® Rapid Repair Mortar) is a one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3
- Pre-bagged for quality
- Just add water
- High early strength
- Rapid setting
- Contains no chloride admixtures
- Non corrosive to steel
- Can be overcoated
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete RepairsSika MonoTop 614F (25kg)
R4 Flowable Cementitious Repair Mortar
Sika® MonoTop -614F is a cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3.
- One component, ready to use
- Low shrinkage
- High mechanical properties
PLEASE CALL US FOR UP TO DATE PRICES
(0 reviews) -
Concrete RepairsSika MonoTop 4012 (25kg)
Cementitious R4 concrete repair mortar containing recycled waste materials
Sika MonoTop®-4012 is a 1-part, cementitious, fibre reinforced, low shrinkage repair mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations.
- Uses recycled waste materials
- Layer thickness 6–120 mm
- Sulphate resistant
- Hand and machine application (wet spray technique)
- Easy to apply
- Very low shrinkage behaviour
- Does not require a bonding primer
- Low permeability
- A1 fire rating
- Class R4 of EN 1504-3
PLEASE CALL US FOR UP TO DATE PRICES
(0 reviews) -
Concrete RepairsSika MonoTop 615 (25kg)
R3 Cementitious High Build Concrete Repair Mortar
Sika MonoTop 615 is a one component cement based polymer modified high build repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN1504-3
- Pre-bagged for quality
- Just add water
- Sprayable by the wet spray method
- Contains no chloride admixtures
- High build
- Low wastage
PLEASE CALL US FOR UP TO DATE PRICES
(0 reviews) -
Concrete RepairsSika MonoTop 1010 (25kg)
Sika MonoTop® -1010 is a cementitious, polymer modified coating material used as bonding primer and reinforcement corrosion protection. It contains recycled waste materials which leads to a reduced carbon footprint compared to an equivalent performing
mortar.- Uses recycled waste materials
- Easy to use, just add water
- Good adhesion to concrete and steel
- Good resistance to water and chloride penetration
- Can be applied with a brush or by wet spray technique
PLEASE CALL US FOR UP TO DATE PRICES
(0 reviews)
Here is a rundown of just a few of our top-selling repair products:
Fosroc – Renderoc HB30 (22kg) – High-performance fibre reinforced lightweight concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R3. For the reinstatement of concrete where low permeability characteristics are required but where high compressive strength is not the most important consideration. Renderoc HB30 has been specifically developed for vertical and overhead repair work where its lightweight nature and high build characteristics make it ideal.
Fosroc – Renderoc HB45 (25kg) – High performance, hand / wet-spray applied, fibre reinforced high build, high strength, concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R4. For the reinstatement of reinforced concrete where low permeability characteristics are required and where higher compressive strength is a consideration. Renderoc HB45 has been specifically developed for the repair of columns and beams, but because of its medium fresh wet density, is also suitable for soffit repairs.
Sika MonoTop 610 (25kg)– Cementitious Steel Reinforcement Primer & Bonding Bridge is a one-component cementitious, polymer-modified primer for reinforcement protection and also a bonding bridge for MonoTop concrete repair mortars. The material only requires mixing with water and has an adjustable consistency for ease of use. Suitable for drinking water contact.
Sika MonoTop 612 (25kg) – R4 Hand Placed / Wet Spray Repair Micro-concrete is a cement-based, one component low permeability repair micro-concrete, containing silica fume and polymer, meeting the requirements of Class R4 of BS EN 1504-3. The material can be used internally or externally. Can be used for repairing all types of structures, horizontal, vertical and overhead and is also suitable for application in marine environments.
Sika MonoTop 614F (25kg)– R4 Flowable Cementitious Repair Mortar is a cement-based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Can be used for:
- Horizontal or vertical repairs
- Bridges
- Marine structures
- Tunnels
- Buildings
- Fire damaged structures
- For exterior and interior use
- In place of R1, R2 & R3 mortars
As always at CPRL we are here to meet the needs of our customers. If you’re not sure what kind of repair product you need for your project please contact us and our technical team can talk through the options and the costs to ensure you have the right product for the job.
Contact us today to learn more about our range of concrete repair products.
Why Choose CPRL For Industrial Repair Products?
- We Only Supply High-quality Products
Our business is committed to offering customers access to the best repair products, primers, paints, and coatings on the market. - Free Expert Advice
If you ever have any questions about a particular product or project, our friendly sales team will be available to help. - One Of The UK’s Leading Suppliers Of Coatings, Paints and Repair Products Our business supplies a range of repair, paints and coating products to thousands of clients across the UK for use in commercial, industrial, and residential environments.
- Low Prices
CPRL provides all products at competitive prices. If you find a competitor with a lower price, we will do our best to beat it.