Repair Maintenance
Showing 28–36 of 76 results
-
Concrete Repairs
Fosroc – Primer P7
Uses
- Fosroc Primer 7 is used to prime prepared concrete joint edges prior to the installation of Thioflex 600 Gun Grade and Thioflex 600 Pouring Grade polysulphide joint sealants.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete Repairs
Fosroc – Barrel Gun
Uses
- For use with Fosroc 600ml sachets and adaptable for use with cartridges and application of multipart sealants.
PLEASE CONTACT US FOR LATEST PRICES
(0 reviews) -
Concrete Repairs
Fosroc – Thioflex 600 Gun Grade (2.5-litres)
Uses
- Sealing movement joints in building and civil engineering structures, including superstructures, floors, basements and subways.
- Use with Fosroc – Primer P7, Fosroc Thioflex Mixing Paddle and Fosroc – Barrel Gun
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete Repairs
Fosroc – Thioflex 600 Pouring Grade (5-litres)
Uses
- Sealing movement joints in building and civil engineering structures, including superstructures, floors, basements and subways.
- Use with Fosroc – Primer P7 and Fosroc Thioflex Mixing Paddle
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete Repairs
Fosroc – Renderoc HB30 (22kg)
Uses
- For the reinstatement of concrete where low permeability characteristics are required but where high compressive strength is not the most important consideration. If high compressive strength is required Renderoc HB45 should be used.
- Renderoc HB30 has been specifically developed for vertical and overhead repair work where its lightweight nature and high build characteristics make it ideal.
- Renderoc HB30 is suitable for repair methods 3.1, 3.3, 7.1, 7.2 as defined by BS EN 1504-3.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete Repairs
Fosroc – Renderoc HB45 (25kg)
Fosroc – Renderoc HB45 (25kg)
High performance, hand / wet-spray applied, fibre reinforced high build, high strength, concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R4.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete Repairs
Sika Ferrogard 903+ (25L)
Surface Applied Corrosion Inhibitor for Reinforced Concrete
Sika® FerroGard® -903+ penetrates concrete and forms an adsorbed protective film on the surface of the steel reinforcement. The protective adsorbed film of Ferrogard 903+ reduces the rate of corrosion in carbonated and chloride contaminated concrete.
Sika® FerroGard® -903+ is normally applied as part of a corrosion management strategy and is compatible and a component of all the Sika concrete repair and protection systems.
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews) -
Concrete Repairs
Sika MonoTop 412N (25kg)
R4 Concrete Repair Mortar
Sika MonoTop®-412 N is a 1-component, fibre reinforced, low shrinkage repair mortar meeting the requirement of class-R4 of EN 1504-3.
- Class R4 of EN 1504-3
- Sulphate resistant
- For hand or machine application
PLEASE CALL US FOR UP TO DATE PRICES
(0 reviews) -
Concrete Repairs
Sika MonoTop 630 (25kg)
R4 FAST SETTING CEMENTITIOUS REPAIR MORTARSika MonoTop®-630 Rapid (previously Sika® Rapid Repair Mortar) is a one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3
- Pre-bagged for quality
- Just add water
- High early strength
- Rapid setting
- Contains no chloride admixtures
- Non corrosive to steel
- Can be overcoated
PLEASE CALL FOR UP TO DATE PRICES
(0 reviews)