Concrete Repairs
Showing 10–18 of 37 resultsSorted by latest
-
Concrete RepairsSika MonoTop 614F (25kg)
R4 Flowable Cementitious Repair Mortar
Sika® MonoTop -614F is a cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3.
- One component, ready to use
- Low shrinkage
- High mechanical properties
-
Concrete RepairsSika MonoTop 4012 (25kg)
Cementitious R4 concrete repair mortar containing recycled waste materials
Sika MonoTop®-4012 is a 1-part, cementitious, fibre reinforced, low shrinkage repair mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations.
- Uses recycled waste materials
- Layer thickness 6–120 mm
- Sulphate resistant
- Hand and machine application (wet spray technique)
- Easy to apply
- Very low shrinkage behaviour
- Does not require a bonding primer
- Low permeability
- A1 fire rating
- Class R4 of EN 1504-3
-
Concrete RepairsSika MonoTop 615 (25kg)
R3 Cementitious High Build Concrete Repair Mortar
Sika MonoTop 615 is a one component cement based polymer modified high build repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN1504-3
- Pre-bagged for quality
- Just add water
- Sprayable by the wet spray method
- Contains no chloride admixtures
- High build
- Low wastage
-
Concrete RepairsSika MonoTop 1010 (25kg)
Sika MonoTop® -1010 is a cementitious, polymer modified coating material used as bonding primer and reinforcement corrosion protection. It contains recycled waste materials which leads to a reduced carbon footprint compared to an equivalent performing
mortar.- Uses recycled waste materials
- Easy to use, just add water
- Good adhesion to concrete and steel
- Good resistance to water and chloride penetration
- Can be applied with a brush or by wet spray technique
-
Concrete RepairsSika MonoTop 3020 (25kg)
Advantages
- CLIMATE: Reduced Carbon Footprint
- HEALTH & SAFETY: Reduced Dust Formation
- GREEN BUILDING: Meets LEED v4 Requirements
- TECHNICAL PERFORMANCE: Low Cracking Behaviour
- DURABILITY: Sulphate Resistant
- AESTHETICS/ OPTICS: Outstanding Finishing
PLEASE CALL FOR UP TO DATE PRICES
-
Concrete RepairsCPR 726 – Concrete Re-surfacer
Typical Uses
- CPR 726 – Concrete Re-surfacer is particularly suitable for application to porous, vertical concrete and blockwork substrates.
-
Concrete Crack & Joint RepairCPR 725 – Thixotropic Epoxy Concrete Crack Sealer
Uses
- CPR 725 – Thixotropic Epoxy Concrete Crack Sealer is used for injection of vertical cracks in concrete, brickwork and masonry.
- Filling voids and joints where little or no movement is anticipated.
- Injection into single sided cracks where depth and quantity of resin needs to be controlled.
-
Concrete Patch Repair MortarsCPR 722 – Polyester Concrete Repair Mortar
Typical Uses
- Use CPR 722 – Polyester Concrete Repair Mortar for rapid repairs, bedding, jointing and profiling of concrete, masonry and brickwork.
- Repair of in-situ and pre-cast concrete.
- As an adhesive for bedding and fixing kerbs, brick slips, manhole sets, concrete slabs, etc.
-
Concrete Patch Repair MortarsCPR 720 – Self Priming Concrete Patch Repair Mortar
Typical Uses
- CPR 720 – Self Priming Concrete Patch Repair Mortar is used for repairs to spalled or damaged concrete; chemical bunds; bedding pre-cast concrete beams; nosings on expansion joints; floor repairs.
