Description

Tool Clean Solvent

CPR 201 Tool Clean Solvent is an equipment cleaner suitable for the removal of uncured Epoxy, Polyester and Polyurethane resins. It has a low evaporation rate, mild odour and low toxicity, making it much more user friendly than other commonly used solvents. CPR 201 is also largely biodegradable and photochemically non-reactive, and therefore more acceptable from an environmental point of view.

Typical Properties

Low Hazard
Low evaporation rate
Excellent solvency powers
80% Biodegradable

Packaging

CPR 201 Tool Clean Solvent is supplied in 5ltr packs

Technical Data

Appearance: clear, colourless liquid
Odour: mild, sweet
Flash Point: 31°C
Vapour Pressure: 10mm Hg @ 20°C
Specific Gravity: 0.921 @ 20°C
Solubility in water: Soluble

Storage and Shelf Life

Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C.
CPR 201 Tool Clean Solvent has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions.

Health and Safety

Do not breathe vapour/spray.
Avoid contact with skin and eyes.
Provide adequate ventilation.
Refer to Material Safety Data Sheet for further information.
CPR 201 Tool Clean Solvent shall be applied strictly in accordance with the manufacturer’s instructions.
For specific advice regarding any aspect of this product please consult our Technical Department

Legal Notice

Whilst all reasonable care is taken in compiling technical data on the Company’s products, all recommendations or suggestions regarding the use of such products are made without guarantee, since the conditions of use are beyond the control of the Company.

It is the customer’s responsibility to satisfy himself that each product is fit for the purpose for which he intends to use it, that the actual conditions of use are suitable and that in the light of our continual research and development program the information relating to each product has not been superseded.