Shop
Showing 10–18 of 118 resultsSorted by latest
-
Roof RepairSikalastic RoofPro (15L)
Sikalastic® RoofPro
Is a single component – easy and ready to use cold applied moisture-triggered polyurethane membrane. It cures to form a seamless and durable waterproofing solution for exposed roof areas and structures as well as roofs displaying complex detail areas where accessibility is limited.
-
AncillariesCPR 206 – Anti-Slip Aggregate
Typical Uses
- CPR 206 – Anti-Slip Aggregate is used in coatings and sealers to impart a lightly textured finish that increases slip resistance. E.g. factory floors, driveways, garages, wet rooms etc.
- The aggregate comes in 3 different grades – fine, standard and course.
Call Us Now: 0113 418 0509
-
Concrete RepairsFosroc – Renderoc HB30 (22kg)
Uses
- For the reinstatement of concrete where low permeability characteristics are required but where high compressive strength is not the most important consideration. If high compressive strength is required Renderoc HB45 should be used.
- Renderoc HB30 has been specifically developed for vertical and overhead repair work where its lightweight nature and high build characteristics make it ideal.
- Renderoc HB30 is suitable for repair methods 3.1, 3.3, 7.1, 7.2 as defined by BS EN 1504-3.
-
Concrete Repairs
Fosroc – Renderoc HB45 (25kg)
Fosroc – Renderoc HB45 (25kg)
High performance, hand / wet-spray applied, fibre reinforced high build, high strength, concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R4.
-
Concrete RepairsSika Ferrogard 903+ (25L)
Surface Applied Corrosion Inhibitor for Reinforced Concrete
Sika® FerroGard® -903+ penetrates concrete and forms an adsorbed protective film on the surface of the steel reinforcement. The protective adsorbed film of Ferrogard 903+ reduces the rate of corrosion in carbonated and chloride contaminated concrete.
Sika® FerroGard® -903+ is normally applied as part of a corrosion management strategy and is compatible and a component of all the Sika concrete repair and protection systems.
-
Concrete RepairsSika MonoTop 412N (25kg)
R4 Concrete Repair Mortar
Sika MonoTop®-412 N is a 1-component, fibre reinforced, low shrinkage repair mortar meeting the requirement of class-R4 of EN 1504-3.
- Class R4 of EN 1504-3
- Sulphate resistant
- For hand or machine application
-
Concrete RepairsSika MonoTop 630 (25kg)
R4 FAST SETTING CEMENTITIOUS REPAIR MORTARSika MonoTop®-630 Rapid (previously Sika® Rapid Repair Mortar) is a one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3
- Pre-bagged for quality
- Just add water
- High early strength
- Rapid setting
- Contains no chloride admixtures
- Non corrosive to steel
- Can be overcoated
-
Concrete RepairsSika MonoTop 614F (25kg)
R4 Flowable Cementitious Repair Mortar
Sika® MonoTop -614F is a cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3.
- One component, ready to use
- Low shrinkage
- High mechanical properties
-
Concrete RepairsSika MonoTop 4012 (25kg)
Cementitious R4 concrete repair mortar containing recycled waste materials
Sika MonoTop®-4012 is a 1-part, cementitious, fibre reinforced, low shrinkage repair mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations.
- Uses recycled waste materials
- Layer thickness 6–120 mm
- Sulphate resistant
- Hand and machine application (wet spray technique)
- Easy to apply
- Very low shrinkage behaviour
- Does not require a bonding primer
- Low permeability
- A1 fire rating
- Class R4 of EN 1504-3
